Complete Guide to Bollinger Bands|Reading, Setup, Testing
Bollinger Bands use a moving average and bands to read overbought/oversold levels and volatility. This guide covers reading, settings, band walks and squeezes.
The big picture of Bollinger Bands (how to use this guide)
This guide serves as a hub, an entry point to each Bollinger Bands topic. From their meaning, how to read them and their settings to trading approaches, squeezes, markets where they work less well and backtesting, each section gives an overview and leaves the details to individual articles. Use it as a map for finding which topic to read.
Bollinger Bands are an indicator that draws bands above and below a moving average (the middle line) over a set period, based on how widely price is dispersed (the standard deviation). Because they let you read two pieces of information at once, the position of price and the width of the bands, they are used both to gauge overbought and oversold conditions and to track changes in volatility.
How to read Bollinger Bands (overview: middle line, ±2σ and band width)
Bollinger Bands consist of the middle line (a moving average), the upper band (+σ) and the lower band (-σ). If price movements are assumed to follow a normal distribution, about 68.3% of prices fall within ±1σ of the middle line, about 95.4% within ±2σ and about 99.7% within ±3σ. For this reason, a move outside ±2σ is used as a rule of thumb for an "unusual level". However, this is a theoretical guideline that assumes a normal distribution. Actual price movements do not follow a normal distribution exactly, so keep in mind that the real proportions often differ from these figures.
The width of the bands also carries information. Wide bands indicate a period of high volatility, and narrow bands a period of low volatility. Reading changes in this width as squeezes and expansions is discussed below. Their meaning and how to read them in detail are covered in a separate article on the basics of Bollinger Bands.
Bollinger Bands settings (overview: 20 and 2σ)
The common default is a period of 20 with a standard deviation multiplier of 2. A period of 20 is said to correspond to roughly one month of trading days, and many traders use it as a baseline. Widening the multiplier from 2 to 3 makes price leave the bands less often, which makes the condition stricter. Shortening the period, on the other hand, makes the bands react faster but also adds more noise.
How to change the settings and what each value means are covered in a separate article. How the results change when you vary the period or multiplier is compared in an article on backtesting.
Trading with Bollinger Bands (overview: contrarian trading, trend following and band walks)
Trading with Bollinger Bands broadly falls into contrarian trading and trend following.
| Approach | Idea |
|---|---|
| Contrarian trading (mean reversion) | Treat a move near the outer edge of the bands as a sign of overextension and aim for a return to the middle line |
| Trend following (band walk) | Ride a trend in which price keeps moving along a band |
In contrarian trading, you aim for price that has reached the area near the lower band to move back toward the middle line. In a market with a strong trend, however, a "band walk" can occur, in which price keeps moving along a band. A contrarian trade placed at such a time risks price continuing to move against it, so it is worth considering when to switch between contrarian and trend-following views.
How to approach contrarian trades in concrete terms, and how to read and respond to band walks, are each covered in a separate article.
Squeezes and expansions (overview)
A state in which the bands narrow is called a squeeze, and the sharp widening that follows is called an expansion. A squeeze is generally said to indicate contracting volatility, and a large price move tends to follow. However, the direction is often unknown in advance, and whether an expansion marks the start of a large move depends on the market environment.
How to define and identify a squeeze and how to use it for entries are covered in detail in a separate article.
Markets where Bollinger Bands work less well (overview)
The following situations are generally cited as ones in which Bollinger Bands work less well. In a strong downtrend, price may keep falling even after reaching the area near the lower band, which makes contrarian trades less effective. In a range with extremely little price movement, the band width also changes little, which can make it hard to judge squeezes and expansions.
Which conditions bring more false signals is covered in a separate article.
Evaluating Bollinger Bands through backtesting|Assessing their effectiveness with your own data
The rules of thumb so far are generalizations. How Bollinger Bands actually perform for the instruments you trade and on your timeframe can only be found out through backtesting.
In ENTRIQ's Chart Replay, you can display Bollinger Bands and test conditions repeatedly on historical charts. Building up your own observations and records of how price moved after reaching the outer edge of the bands, and how long band walks lasted, deepens your understanding of the indicator. How to backtest in concrete terms is covered in a separate article.
Why Backtesting Builds Confidence explains why checking with your own data gives your decisions a basis. Once you have built up records through backtesting, you can also review your trades with AI Analysis to put your tendencies into words.
Frequently asked questions (FAQ)
Q. What are Bollinger Bands?
A. They are an indicator that draws bands above and below a moving average (the middle line) based on the standard deviation of price. They are used as a rule of thumb for reading the position of price and changes in volatility at the same time.
Q. Should I just use the 20 and 2σ settings as they are?
A. 20 and 2σ are a widely used baseline, but they aren't necessarily the best. Changing the period or multiplier changes how the bands react, so the starting point is to backtest them on your own timeframe and instruments.
Q. Does price always reverse once it moves outside the bands?
A. Not necessarily. In a strong trend, a band walk can occur, in which price keeps moving along a band. Rather than assuming that "near the outer edge = reversal", it is common to judge it together with the market environment.
Q. Does price always move sharply after a squeeze?
A. A squeeze is generally considered more likely to be followed by larger price moves, but their direction and size can't be known in advance. Whether to confirm the direction first and combine it with entry conditions is something you need to check against your own criteria through backtesting.
What this article covered
- Bollinger Bands are an indicator that reads overbought/oversold conditions and volatility through three elements: the middle line, the position relative to the bands and the band width.
- How to read them differs by purpose, such as contrarian trades, band walks and squeezes, and each is covered in depth in individual articles.
- The rules of thumb are only generalizations; whether they hold in your own markets and on your timeframe should be checked through backtesting.
This article is for informational purposes only and does not recommend any specific trade or the use of any indicator. All investment decisions are your own responsibility.
Reproduce this validation yourself
With ENTRIQ's chart replay, you can trade through past charts using the same rules.
Try the demo — no sign-upNo sign-up or card needed. Runs right in your browser. Start 14-day free trial →
Validate your method on past charts
The same validation in this article can be reproduced with your own method. On past charts, do the classics really work?
- ✓ Replay past charts
- ✓ AI feedback on your trades
- ✓ Validate methods with statistics
No sign-up or card needed. Runs right in your browser.